ALCAD presents its new LIVERO intercom and access control system catalogue for correctional facilities

LIVERO is the first complete solution on the market that complies with international regulations concerning fire evacuation procedures in non-residential buildings, as regards intercom systems with a local room terminal. It is 100% IP and factory-configured, ideal for correctional facilities, car parks, sports centres, shopping centres, areas of refuge, hotels, town halls... In addition, it is easily integrable with our IPTV platform, a complete TV solution over IP networks.

In the case of correctional facilities, LIVERO facilitates communication between different critical points. Thanks to its architecture, it facilitates bidirectional communication with SIP technology, by interconnecting the various elements with each other and adapting to each situation, both in areas with or without supervision by officials. Thus, all dangerous components are kept out of the reach of inmates.

LIVERO includes in each critical area a CIC-611 and MCA-960 intercom point (100% IP, with IP55 and IK09 protection), and a software module (installed on a server / PC). The system is centralized and managed from a single or multiple control posts, assigned by zones according to need.

If required, the system allows the addition of DECT type cordless phones, IP phones or even smartphones, to increase the mobility of security personnel.

Autonomous operation between modules

Each module has its own server, allowing the system to function autonomously, but at the same time maintaining the interconnection with the rest of the modules of the facilitiy. Two modules with their elements and operation are described below:

• MODULE 1. The MCA-960 devices are located inside each cell, allowing two-way communication with the officials. The CHC-401 circuit boards (responsible for carrying out IP communication with the entire system) are placed outside the cell, preventing them from being misused.
  
  The CIC-611 unit is placed in common areas, allowing SIP communication. The difference with MCA-960 units is that the former includes all the components to connect to the IP network.
  
  The communicators and units are connected to the switches of each module, which in turn is interconnected with other elements, such as the module server computers, telephones, routers and Wi-Fi points.
  
  SIP phones, DECT phones, computers and smartphones can be used to monitor and receive calls. The latter allow officers to receive calls, communicate with inmates and access LIVERO’s Viewer and Manager system wirelessly.
   
• MODULE 2. In module 2 of this diagram, the distribution of the elements and interconnection is similar. In this case, the MCA-960 intercoms have been replaced within each cell by the CIC-611 units. In these cells, the connection is through RJ45 and the intercom has a panel that shows the status of the call.
   

For more information concerning diagrams and elements of the installation, please download our catalogue on the link below.

Any questions? Please contact us. We will be happy to help you.